Trans Ally Keyring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple keyring to show those around you that you are a trans ally.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 13
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
Trans people all over the world have always had a tough time just being allowed to be themselves, but especially so in these times. Here's an easy way for CIS-people to show our support.
The colours should be self-explanatory, as well as the trans symbol. The pink part of this particular model is a stylised A, to symbolise ally-ship.
Since the A and symbol stick out from the disc on both sides, the model needs to be printed in parts (to make sure you get a nice and smooth surface on both sides of the disc). But if you have a multi-colour capable printer you can use the combined A/Symbol file rather than the separate files for those.
When assembled it gives the illusion of the ally-A and trans symbol sticking right through the outer disc.
Printing instructions
Designed to be printed with:
- 0.4 mm nozzle
- 100% solid infill
Print:
- 1 copy of the circle (use grid supports to get an as nice as possible cutout on the underside, and use ironing to get a nice and flat top surface)
- 2 copies of the A
- 2 copies of the symbol, one of which needs to be mirrored
or - 2 copies of the combined A/symbol, one of which needs to be mirrored
On the A and trans symbol, either use ironing on the top surface or turn them upside down when assembling the keyring (the combined A/symbol-file needs ironing, you can't turn it upside down when assembling).
Assembly
When all the parts have been printed, use glue to assemble the keyring.