1 / 3
Small Form Factor (SFF) Computer Stand v0.1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical feet to stabilize an HP ProDesk 600 G1 SFF - will work with anything around 100mm/4in wide. This thing was…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 100
- Makes
- 0
- Views
- 904
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Vertical feet to stabilize an HP ProDesk 600 G1 SFF - will work with anything around 100mm/4in wide.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kG8sfFpiA9F
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
15%, cubic subdivision
Filament: anycubic pla black
Notes:
I used a wall thickness of 1.2mm (3 walls @ 0.4mm) and the infill pattern shows through, so try use 1.6mm (4 walls).
Bottom/Top layers set to 1mm (4 layers @ 0.25mm) but that seems slightly too flimsy, so try 1.25mm (5 layers).Category: 3D Printing