KM Tools Katz-Moses Cleat System Dovetail Pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dovetail Pin for the KM Tools Katz-Moses Cleat System in case you break one or want to design your own holders.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Dovetail Pin for the KM Tools Katz-Moses Cleat System in case you break one or want to design your own holders.
Best printed in PETG for some flex, but I've also tested it in ASA, which works fine. Insert the pin through the spring and snap on the handle with the recess facing the spring. The handle should only be able to go on the pin in one orientation.
Replacement springs should be 0.8mm wire diameter, 15mm length, 9mm outside diameter. For example: https://www.aliexpress.us/item/3256806219818375.html.
https://kmtools.com/pages/the-patent-pending-katz-moses-cleat-system