Nadal-on-Court-Plaque
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To my favorite sport idol - Rafael Nadal
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 38
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: Nadal-on-Court-Plaque.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x179mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.08mm
Filaments Used:
#061919 PLA Kingroon Black Transmission Distance: 0.2
#cd382e PLA Kingroon Red Transmission Distance: 4.2
#814100 PLA ELEGOO Brown Transmission Distance: 2.9
#ffffff PLA Sunlu White Transmission Distance: 6.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Brown
At layer #19 (1.6mm) swap to White for the rest.