162mm+163mm version of IKEA TJUSIG Hat Suspension System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
162mm+163mm version of "IKEA TJUSIG Hat Suspension System" made by Dmitry. Fusion file attached, for those who use it.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
162mm+163mm version of "IKEA TJUSIG Hat Suspension System" made by Dmitry. Fusion file attached, for those who use it.
I've used the inner-part of two IKEA RÄCKA, where I found the 163mm version to be the best. But, it's a TIGHT FIT, so I recommend you to use a rubber hammer, to get things together. Also, measure things before printing, as IKEA tends to make multiple revisions over time.
If you use Fusion, change size by simply:
- Open the file
- Go back in the timeline, just after the base feature import
- Adjust the three holes in size, if needed
- Finish base feature

- Hide any other bodies than the main component
- Adjust the Extrude and Fillet if needed
- Update the mirror
You'll face a few broken steps, but just fix them, like you'd normally fix features with missing references.
I'm sure it can be done in 100 other ways. But here's the steps if you're unsure on how to work with the original STEP-file, kindly provided by Dmitry.