1 / 4
GaggiMate Pro PCB Bottom (Magnets and button hole) Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the GaggiMate Pro PCB bottom to allow for access to the boot button and 6.x3mm magnets for mounting
- Rating
- 2 / 5
- Likes
- 8
- Downloads
- 198
- Makes
- 1
- Views
- 1,056
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A remix of the GaggiMate pro pcb bottom. You will still need the cover available from the GaggiMate GitHub or you can use this remix for an easier no support print.
Superglue or epoxy the 6x3mm magnets into the underside and then assemble and use as before. Helpful if you want to temporarily mount the box to the outside when tinkering/testing or if you don't want it sitting on the bottom of the interior or taped to the side.
Consider supporting the GaggiMate project.