Oversized Metallica Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an oversized logo I created for a Metallica concert using their emblem.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
I wanted to create an oversized necklace for my son to have for his first concert. I used Metallica's logo and created a circular backdrop for it. The model was created in Fusion360 and is one of the first ever that I designed.
Print flat on it's back with the logo on top. Minimal supports are needed for the loop connecting to the main chain. I paused at layer 61 (12.20) to change colors.
Credit for the chain goes to Billrobland over at makerworld: https://makerworld.com/en/models/25960-chain-links-for-logo-s-with-video#profileId-22348
Credit for the chain connector goes to mercadogarzas over at makerworld: https://makerworld.com/en/models/143573-v-connector-for-logo-chains-revised-flat-bottom#profileId-628439
Printed on an Flashforge Adventurer 5m. Settings:
Wall generator: Arachne
Wall Loops: 3
Infill: 12%
Infill Pattern: Gyroid
Top Surface Speed: 50mm/s