Flsun T1 pro Aldebaran Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blowing option for Flsun T1 pro.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Blowing option for Flsun T1 pro. I consider the dignity of the model. 1) Minimum airflow fracture. 2) Low noise. 3) Good overview of the print area. 4) Simple design and light weight.
Printed from PETG. Therefore, all gaps and wall thickness in view of this circumstance. If anyone prints from ABS and faces technical difficulties, let me know. The ends of the nozzles were slightly lengthened so that they could then be sharpened to the desired length (because sometimes they are poorly printed). I added 2 ears to the design, which can be used as guides for gluing. There you can insert a small clove f 2 mm. After gluing, cut off the ears. It is better to print with a border of 3-4 perimeters with a 0 gap. This will help when gluing the halves. The excess can then be cut.