Nespresso sleeve and cups holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: CE3S1_Nespresso_strip.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 45 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for a sleeve of original Nespresso cups and a hexagon holder for four single cups.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A sleeve holder for the original Nespresso cups. With a cutout on the bottom that fits over a strip to keep the holder in place. The strip had holes to put a screw through to fixate it into a kitchen cabinet.
Added a two part print for a holder with hexagons for four single cups. The base part has the same cutout so it fits on the strip with the sleeves.