1 / 6
(HSW) Meterwall - Borders for 5x5 211x201mm Honeycomb Storage Wall (Sized for Core One) — image 1
1 / 6

(HSW) Meterwall - Borders for 5x5 211x201mm Honeycomb Storage Wall (Sized for Core One)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Standard rectangular borders for a Honeycomb Storage Wall measuring 112cm x 105cm

Rating
0 / 5
Likes
10
Downloads
48
Makes
0
Views
441
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I spent an obnoxiously long time in OpenSCAD designing borders, corners, and inserts to try to make all the seams align, so I figured I would post the files in case anyone else wants to build an HSW a little over a square meter in area.

I couldn't manage to align all the seams because the Core One can't print corners big enough to cover the 211x201, so I also designed three special connectors for the corners so that every connector grabs 4 panels.

Directions:

  • Print 25x wall-honeycomb-k1-211x201 and 24x insert-hollow-for from the original project
  • Print 2x of everything from this project, except 4x twoByThree
  • Assemble as shown in the install instructions image
  • Hang with narrow side facing the wall and flats on the tops and bottoms

I used 3 walls 0% infill for the grid pieces and 2 walls 25% gyroid for the inserts.

Tags