QIDI Plus4 Air Filter System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A riser with vent and air filter for the QIDI Plus 4
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 15
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a 2 inch riser for the QIDI Plus 4. It has a vent for printing with PLA/PETG and an internal circulating carbon/HEPA air filter for printing with a heated chamber. The vent adapter allows connection to a 4" duct hose, like for a dryer.
You will need an extender for the filament holder, such as this one from 3D Mad Mesh: https://www.printables.com/model/1079332-qidi-plus4-spool-holder-riser
I lined the top with a neoprene rubber foam rated for high temperatures. The shape png files can be used to cut the pattern with a Cricut (use a wheel blade) or by hand.
The filter uses a 120mm blower fan, activated carbon, and 83x43x14mm HEPA filter. Screws/nuts are only needed to attach the fan.
Neoprene sheets: https://www.amazon.com/dp/B08P1WVQXK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Filter fan: https://www.amazon.com/dp/B07M98DQFD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
HEPA filter (for I-LIFE v3 or v5, etc.): https://www.amazon.com/dp/B0D2WPN2NJ?ref=ppx_yo2ov_dt_b_fed_asin_title
There is also a version of the back-left piece without the filter, if you just want a riser with a vent.