Lightsaber-inspired Hose Nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.13 – €0.16 net (excluding VAT)
For file: lightsaber nozzle final gaskets_0.4n_0.2mm_FLEX_MK4SMMU3_11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 11.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hose nozzle inspired by a lightsaber hilt from Star Wars
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 22
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Hose nozzle inspired by a lightsaber hilt from Star Wars. The upper portion of the nozzle can be twisted to close the water flow or vary the water jet intensity.
The two nozzle pieces were printed in PLA using 100% infill.
The special gaskets were printed with TPU. For the hose connection, use a regular garden nozzle gasket.
The 3 gaskets are:
- Cone plug - adhere it using a strong, waterproof adhesive to the lower section
- Ring gasket - carefully pull it over the lower section's threads and set it in place the groove
- Thin upper gasket - place it in the upper section cavity under the threads
You may see a slight leak at first between the sections until the ring gasket sets in place.