NEW GLENN (NG-1)

Multicolor

The multicolor version is only available to members of my club.

Description

     The New Glenn model is a highly detailed 1:200 scale reproduction of the first orbital rocket of Blue Origin, which made its first flight on January 16, 2025. 

     The finished model dimensions are approximately 49 cm high and 8 cm wide.

Printing

• There are 38 parts to print, the total printing time for the entire model is approximately 9 hours.

Choosing your configuration kit.

    There are multiple configuration kits available for this model, depending on your printing and assembly preferences. 

Project 3MF

• For the first time I am adding a multiplate 3MF file.

Files (.Zip)

• Kit with Fuzzy Skin (Full Rocket with fuzzy skin texture on the second stage)
• Kit without Fuzzy Skin (Full Rocket without fuzzy skin texture on the second stage)
• Stand Multi Parts (Stand for one color printer)
  • NEW GLENN or NG-1 plate
• Stand Multi Color (Stand for Multi color printer)
  • NEW GLENN or NG-1 plate

Printing Guide

• For Flap_Silver_x2 parts, you must use the Arachne generation.
• Nameplate AMS
  • Nameplate can be printed with a multicolor system, but also with a color(M600) change at layer 14.

Tips

Settings

• For infill, 15% is sufficient for a decorative object, and you can also use "Lightning" infill settings. .
• For the base, it is recommended to print with 3 perimeters to avoid visible infill.
• If some parts are loose or don't fit, you can change the scale by +/- 1% in the slicer to get a better fit. 

Printing

• For a better final result, I recommend printing the Jonction_Block last so that you can adjust their size according to your print and have a better fit during assembly. 

Post Printing

• You may need to sand the junction areas between the parts for a smoother finish.
• I recommend using glue for better strength and durability.