Prusa Core One Splitter IR Senzor V2
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.43 – €0.53 net (excluding VAT)
For file: PETG_IR_V2-Clutch_22m_0.2mm_COREONE_0.4.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 22.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Splitter for IR sensor Prusa Core One - version 2
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 32
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Splitter for IR sensor Prusa Core One - version 2 from the previous version has modified filament routing through the IR sensor and shortened input splitter so that filament ejection is fully functional. The proposed solution does not require modifications to the original printer covers or interventions in the printer structure. The entire device has been supplemented with magnetic articulated PTFE tube holders that connect to the quick connectors of the splitter.
When assembling the IR sensor, it is necessary to proceed as described in the printer assembly manual (Point 7-12: Side sensor base: parts preparation). Magnets, balls, IR sensor, IR sensor screw and IR sensor side arm screw are removed from the original sensor.
Unprinted parts:
3 pcs - M3 x 10 Allen screws
2 pcs - M3 x 5 Allen screw
3 pcs - M10 PTFE quick connector
Video of assembling the PTFE magnetic holder: