Angled Adpater for Profile Design FC35 Bottle Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter piece for leveling the bottle if the handle bar is mounted at an angle.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 1
- Views
- 248
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Adapter piece is mounted between the mounting peace at the handle bar and the part that holds the bottle, to level the bootle if the handle bar is angled.
A thread insert (M4) per part is needed for the the additional needed screw. The hole for the insert is 5,6 mm in diameter. For mounitng the adapter remove the screw of the mount of the bottle and insert the adapter. the part is identical for both sides, left and right. The insert the screws and fasten them.
Printed out of PLA with four to five perimeters the adapter is ridgid enought to survive racing use.
The model is designed and attached in Fusion 360 so that changes can be made if necessary.