1 / 5
Print in Place Rugged Box (no hardware needed!)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A one and done print!
- Rating
- 4.857 / 5
- Likes
- 488
- Downloads
- 1,841
- Makes
- 5
- Views
- 7,056
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Make sure when you slice it that you can see the hinges separated and not printed together. In OrcaSlicer you might have to right click and separate into parts with the STL. You might want an outer brim and support for the latches, but they are not really necessary.
Updated 6/2/25 - better clearances