Snap-Fit Charging Stand for MG5720 with Attachment Slots – TrimDock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.53 – €7.98 net (excluding VAT)
For file: TrimDock MG5720 for MK4S.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.25 excluding VAT (range midpoint).
- Weight reported by the author
- 123 g
- Print time reported by the author
- 5.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Smart stand for MG5720: Snap-fit base, cable integration & 3-slot holder – dock, charge, groom.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 40
- Makes
- 0
- Views
- 437
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place – it connects automatically and begins charging!
Key Features
Integrated Charging System
The original Philips charging cable is securely mounted inside the stand. The trimmer simply slides into a cutout and makes contact without any extra steps.
Attachment Organizer
Includes three dedicated slots for your most frequently used trimming heads – always within reach and neatly arranged.
Split Design for Easy Printing
The stand prints in two shell parts, which are assembled using three snap-fit connectors. This design allows for support-free printing and easy handling.
Disassembly
On the underside, there are dedicated cutouts where a flathead screwdriver can be inserted and twisted to release the snap-fits if needed.
Viperstripe Accent (Optional)
A shallow 0.08 mm groove runs along the back edge of the stand – designed for use with multi-material printers (MMU). This allows you to add a vivid accent color (e.g., gloss red) that references the MG5720’s power button. If printed with a single material, the groove is shallow enough to go unnoticed or can be painted post-print.
Printing Info
- Designed for FDM/FFF printing, support-free.
- Tested in PLA, 0.2 mm layer height.
- Viperstripe tested with 0.08 mm depth MMU accent.
- Fits most standard printers (tested on Prusa MK4S).
- STL and bcode files included.
Assembly Instructions
Print both shells and the connector pieces. (Optional) Use a multi-material printer to enable the Viperstripe accent.
Insert the three connectors in one of the two shells.
Insert and fix the charging cable inside the designated path. Use the MG5720 as a guide and check if the LED on the charger lights up – this confirms that the trimmer is charging correctly.
Snap the shells together using the three connectors. Ensure the cable is routed correctly and remains free when closing the housing.