1 / 1
Zebraman (Hueforge)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
He was bitten by a radioactive Zebra.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 0
PLA Sunlu Green Transmission Distance: 6
PLA Sunlu Orange Transmission Distance: 8.5
PLA Sunlu White Transmission Distance: 7.7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Green
At layer #12 (1.04mm) swap to Orange
At layer #17 (1.44mm) swap to White for the rest.