1 / 1
Tony, The Child Drunkard (Hueforge)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The National Enquirer has nothing on these folks. Poor kid.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 0
PLA Sunlu Gray Transmission Distance: 2.2
PLA Sunlu White Transmission Distance: 7.7
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.