Spacer for Lado Exhaust Duct
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.45 – €0.54 net (excluding VAT)
For file: Lado_Duct_Spacer_0.4n_0.25mm_PETG_COREONE_18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 18 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple spacer plate for the Lado Exhaust Duct from Jesh.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a simple 4mm thick spacer frame for the Lado Exhaust Duct by Jesh for the Prusa Core One to increase the clearance on the left.
I added little grooves, to which I superglued a rubber lip for additional sealing and vibration isolation. With this, the PETG duct does not directly touch the metal frame of the Core One.
Watch out for the orientation during installation. As the duct itself is not symmetrical, the spacer frame is not symmetrical as well. The holes are big enough so that M3 screws can easily pass through. Just make sure your screws are long enough.
I used 12mm M3 screws to mount it using a 3mm thick rubber lip.