Sgt. Fury #1 Cover (Hueforge)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My uncle was in WWII and loved this comic. I had this issue as a kid.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.29x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Creality Black Transmission Distance: 1
PLA Sunlu Grass Green Transmission Distance: 2.5
PLA Creality Red Transmission Distance: 1.4
PLA Sunlu Yellow Transmission Distance: 6.2
PLA American Filament Warm White Transmission Distance: 4.1
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Grass Green
At layer #7 (0.64mm) swap to Red
At layer #10 (0.88mm) swap to Yellow
At layer #12 (1.04mm) swap to Warm White for the rest.