1 / 1
Alaska Flag Variant with Bear (Hueuforge)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very nice indeed. 49th State. I live here.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x141.18mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 1.4mm
Filaments Used:
PLA Sunlu Blue Transmission Distance: 4.6
PLA Hatchbox Gold Transmission Distance: 2.3
PLA American Filament Classic White Transmission Distance: 3.8
This print uses 3 unique filaments
Swap Instructions:
Start with Blue
At layer #9 (0.8mm) swap to Gold
At layer #14 (1.2mm) swap to Classic White for the rest.