Dog Has a Gun (Hueforge)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My dog Earl.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This will work with both sizes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 295x189.49mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA Creality Black Transmission Distance: 1
PLA Creality Red Transmission Distance: 3.3
PLA Creality Beige Transmission Distance: 3.3
PLA Creality White Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to Beige
At layer #14 (1.2mm) swap to White for the rest.