Ender3V3 Plus Nebula Camera mount with CoPrint support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple camera mount that bolts to the filament run out sensor location. Two versions one for the larger CoPrint head
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
5/7/25 Update - After fitting a new X carriage I had to adjust the mount slightly. Now sits further back and higher up
Nebula Camera mount for the Ender3V3 Plus, should work on the regular V3 assuming it has the runout sensor.
I am not using the runout sensor so this was an ideal location to mount the camera as it then tracks up and down with the Z axis.
There are two versions, the regular and then an extended to support the larger CoPrint head, the camera is spaced further back.
You will need shorter M3 bolts for the connection to the runout sensor mount and then a ¼ bolt for the Nebula mount.
The bracket has two holes in it for cable ties to secure the camera cable.
Printed with the camera mount facing down to the bed with tree supports in PLA at 20% infill, 4 walls etc.