1 / 9
HIKMICRO Mini2 case with macro lens
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Hikmicro Mini2 thermal camera with a sliding macro lens
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 69
- Makes
- 1
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the HIKMICRO Mini2 thermal camera, with a sliding 20mm macro lens holder.
A 20mm ZnSe CO2 focus lens is needed for this project. I used a 38.1mm focal length.
Printed in PLA, 0.10 layer height
Instructions:
- Fit the camera into the case
- Put the lens in the holder, the holder has two little tabs on the back that will collapse and hold the lens in place, just push firmly
- Place the lens holder on the case, the two lips will clip in place