Mec-Gar P18 38S Base Plate Extension
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.04 – €1.27 net (excluding VAT)
For file: Mec-Gar P18 38S Base Plate_Body_wFloor_V1_0.4n_0.28mm_PLA_COREONE_39m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 39 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This bae plate replaces the OEM on RIA 51679 and still fit the magwell. No additional capacity.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 103
- Makes
- 1
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've always wanted base bigger base plates for my RIA 51679, but certain companies that provide them are wishy washy on if they will fit this particular magwell. Plus they are expensive. This one fits the magwell and adds no additional capacity as the floor follower keeps the spring in the same spot as OEM on the Mec-Gar P18 38S mag bodies mine came with. I've found it best to print the body with the aft upper chamfer down. You can use an xacto knife to slice off the tiny ears that remain if you wish. Printing aft side down works too, but it doesn't look as nice after you take the supports off. The most critical feature is the rail interface with the mag body so you want to keep that section somewhat perpendicular to the build plate of your printer.