Cable guide for CAME gate motor
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.67 – €0.81 net (excluding VAT)
For file: porta cavi cancello-Body_0.4n_0.2mm_ASA_MINIIS_47m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.74 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 46.8 min
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cable guide for CAME gate motor
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
This model was made to hold a couple of cables for the gate end stop switch and prevent them from rubbing onto the arm and coming loose.
The model features 2 holes to use zip ties to hold the cables firmly and can be mounted with two M4x12 screws.
I recommend to print with 100% infill with a heat resistant filament. In my case I had some ASA available, but it's probably better to use some PETG.
My motor is from the CAME ATI series A5000.
I've included the FreeCAD file to allow people to modify the model as needed.