1 / 3
LR44 AG13 cell battery box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box for LR44 or AG13 battery cells
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Box for 15 pieces LR44 or AG13 battery cells
Print in place hinge with tolerance 0.4mm. Tolerance can be changed by parameter in Fusion360.
Print recommendation:
- PETG
- 0.2 mm layer height
- 4 wall lines
- 30% infill grid
After printing:
- let it cool down
- carefully move and losen the hinges
- close and open the box several times to wear out the lids a little bit; may use a screw driver for opening the first time
- use a marker to paint the label (or print in two colors)