1 / 1
Pedestrian Safety Device aka The Brick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cars not stopping at crossing in your neighborhood? Just print the brick and be on your merry way!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Vision Zero Vancouver's campaign Grab a Brick! Now you can print your own personal brick to protect yourself while crossing streets!
Pictures at 100% and 25% scaled.
Print instructions:
- Printable in PLA;
- For best results use Panchroma™ Marble PLA or a similarly coloured filament;
- Alternatively, just paint after printing.
- Adaptive cubic infill 10%;
- Scale it up or down depending on your preferred brick size;
- 0.2 Speed preset on the Mini+ IS;
- The bigger the layer height, the faster will print;
- Fuzzy skin on all surfaces.
Happy printing! If you print, please post a make.
Disclaimer: I won't be held responsible for any fights you get with drivers. Use at your own risk.