1 / 4
Cartographer Fan Mount Qidi Plus 4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the model installation Cartographer 3D for Qidi Plus 4
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 88
- Makes
- 1
- Views
- 776
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Cartographer 3D mount has been modified as it has two separate boards (processor and coil).
The board with the chip has been moved further away from the hot bed.
The coil and the board are connected by four wires.
For mounting you need:
Two bolts М3 din 7991 length 16mm.
Two insert nuts M3 Length 3mm, OD 4.2mm.
Optional (for tight fit of the lid) self-tapping screw М1.7 length 5mm.
Print from pa6-cf30.
Settings:
x_offset: 2.4
y_offset: 21.4
[z_tilt]
z_positions:
-17.5,138.5
335.7,138.5