Power Strip Bracket 40mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.63 net (excluding VAT)
For file: Power_Strip_Brackets_x2_40mm_with_Cutout_0.6n_0.35mm_PLA_MINI_1h05m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.48 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.08 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bracket(s) to mount a 40mm high power strip on a plate/wall. Remix of a design by Skov Knudsen Inventions.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A quick 40mm remix of the Prusa mini power adapter holder by Skov Knudsen Inventions with an added cutout. I use these to mount my power strip under my IKEA LACK Prusa Mini enclosure. It may not be the absolute perfect solution for my scenario, considering that the plate is hollow etc. but I like the idea with the two corner brackets only and it works just fine for now.
I just quickly changed the height from 35mm to 40mm, added a round cutout to not block the sockets / power switch, and printed 2 of these with PLA (no fitting PETG at hand) at 0.35mm layer height (0.6mm nozzle), 25% infill, and support (75% XY separation, 3mm spacing, don't support bridges).