Reifen aus TPU für Spulenrand - TPU tires for coil edge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soll als Kantenschutz / Laufrollenschutz dienen
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ein Reifen für die "Spulenfelge" (4mm breite Wand) aus TPU.
Es sind sieben Durchmesser von 196mm bis 202mm (Spule).
Der Reifen wird über den Rand geklipst und hält dann eigenständig. Falls nicht, helfen einige Tropfen Sekundenkleber.
Man kann im Slicer die Breite von 4mm mittels Schnittfunktion verringern.
Die Reifen können mit einer 0,8 mm-Düse ohne Stützen in 0,3mm gedruckt werden.
Mit einer kleineren Düse könnte Stützgeometrie notwendig sein ….
A tire for the “coil rim” (4mm wide wall) made of TPU.
There are seven diameters from 196mm to 202mm (coil).
The tire is clipped over the rim and then holds on its own. If not, a few drops of superglue will help.
You can reduce the width of 4mm in the slicer using the cut function.
The tires can be printed with a 0.8 mm nozzle without supports in 0.3 mm.
With a smaller nozzle, support geometry may be necessary .…