Babboe Curve Maxi cosi holder additional fixture
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.32 – €6.51 net (excluding VAT)
For file: Babboe_Curve_Maxicosi_addon_0.2mm_PETG_MK3S_4h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.92 excluding VAT (range midpoint).
- Weight reported by the author
- 102 g
- Print time reported by the author
- 4.9 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The fixture of the maxicosi holder is only fixated on one end --> Reduces vibrations
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 684
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For the Babboe Curve there is a maxicosi holder that vibrates quite a lot. In the picture you can see the marked 2 screws that are in the original product. The Block (Green in my case) prevents the base to from vibrations. You can still remove the maxicosi holder.
This one is to have an additional fixation that reduces the vibrations. I printed out of PLA with 100% infill to have the maximum strength. To fixate it drill a hole with 6mm drill in the spot of the hole. Then use a M5 screw and washers and of course locktight.