1 / 5
12 mm PCB Standoffs With Nuts and Bolts, M3x0.5 thread — image 1
1 / 5

12 mm PCB Standoffs With Nuts and Bolts, M3x0.5 thread

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PCB standoffs. For best results use .05mm layer height for threads.

Rating
0 / 5
Likes
46
Downloads
850
Makes
0
Views
2,362
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

PCB standoffs. For best results use .05mm layer height for threads. this will give you 10 layers per thread and should result in good performance. Please let me know if you find them useful.

12 mm standoffs with M3x0.5 threads.

3-10-19 - Updated with chamfers in threaded holes and looser tolerance on threads. Works much better now.

Print instructions

Category: Electronics Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: .05

Infill: none

Filament: hatchbox pla black
Notes:

The threads are a little tight when they first come off the build plate, but they work loose easily and then work freely like they should. Your mileage may vary of course. I printed mine with a 0.4mm nozzle but I suspect you could get much better results with a smaller one.

Tags