1 / 7
Andonstar AD407/AD409 Ring Light
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ring light attachment for the Andonstar AD407 soldering microscope
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 93
- Makes
- 0
- Views
- 1,357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ring light attachment for the Andonstar AD407 soldering microscope. Can be printed without supports, place all models face down.
Bill of materials
- Adafruit QT Py 2040 (https://www.adafruit.com/product/4900)
- Adafruit NeoPixel Ring 16 RGBW (https://www.adafruit.com/product/2854)
- Clear filament for bottom piece (I used Polymaker Polylite Clear PETG)
Code
Some simple code to set the brightness level based on button presses https://github.com/loopj/microscope-ring-light
Assembly
- Solder 5V, GND, and Data In lines from the QT Py to the NeoPixel Ring using suitable wire (see photo)
- Insert QT Py PCB and NeoPixel PCB into the “bottom” printed piece
- Unscrew the lens protector cap from the microscope
- Insert the lens cap into the hole in the “top” printed piece
- Insert the button piece into the small hole in the top piece
- Screw the lense cap back onto the microscope, with the top piece attached
- Snap-fit connect the bottom piece to the top piece
Potentially works with similar microscopes like the ADSM302.