Equerre d'angle / Corner bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.92 – €1.12 net (excluding VAT)
For file: Equerre renfort banc_0.4n_0.2mm_PLA_MK4S_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.02 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 49.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple corner bracket / stiffener, 43x43x43mm, to be fixed with 2xM5 bolts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A corner bracket that I made to use as stiffener for a bench, but could be used for something else.
Size : 43x43x43mm
Bolts: made for 2 bolts M5 countersunk head screw
Printed in PLA, with 4 walls, no support needed.
C'est une équerre que j'ai faite pour renforcer un banc, mais peut être utilisé pour autre chose.
Dimension: 43x43x43mm
Visserie : 2 vis M5 à tête fraisée
Imprimée en PLA, avec 4 périmètres, pas besoin de support.