IKEA Lack Table Leg Leveler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leg levelers for IKEA Lack table or anything with a 50mm square leg.
- Rating
- 4.85 / 5
- Likes
- 206
- Downloads
- 1,167
- Makes
- 16
- Views
- 4,583
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Leg levelers for IKEA Lack table or anything with a 50mm square leg. I printed them at .30 layer height with petg and they work fine. They provide a maximum adjustment of 10-11 mm per leg.
I have also included a wrench to help with the adjustment if you need it. I was able to do it with my fingers just fine but if I had a wrench that size I would have used it for sure.
Update 3-22-19: I did print the wrench and it works very well. It's admittedly a little loose fitting but still works great and isn't a waste of time and plastic to print. I am glad I have it now for when I move my Lack enclosure. It makes adjustment way easier.
Check out these other things for IKEA Lack table...
Stacking leg couplers: https://www.thingiverse.com/thing:3488697
Leg stiffeners: https://www.thingiverse.com/thing:3490946
Print instructions
Category: Decor Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .3
Infill: 20
Filament: hatchbox petg orange
Notes:
Adjust the infill and resolution to your taste. I can't remember what infill percentage I actually used when I made them so I guessed at 20%. The wrench was printed with 20% cubic infill + 3 perimeters and was plenty stiff.