Truma Net X control panel trim
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.45 – €0.55 net (excluding VAT)
For file: Truma-inetX-panel-trim-2_0.4n_0.2mm_PLA_COREONE_22m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 22.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A very simple trim that will hide the screw holes when converting from the old Truma CP to the Truma Inet X panel
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 86
- Makes
- 1
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a very simple trim that will hide the screw holes when converting from an old Truma CP to the new Truma Inet X panel.
This trim is 1.25mm thick, 124mm outer width (inner hole width 108mm.) Outer height 97mm (inner hole height 82mm.)I printed mine in PLA on a satin sheet with a fuzzy edge.
As you can see from the images of the panel in situ, the trim is very unnoticeable… which means it's a success.