Tablet Stand (Fud Version): Minimal and Sturdy Tablet Stand
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.60 – €3.18 net (excluding VAT)
For file: fud-tablet-stand_0.2mm_PETG_MK3S_3h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.89 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 3.41 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple modern and minimal tablet stand. It is sturdy and strong, while using less material than other stands.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 177
- Makes
- 1
- Views
- 659
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Fud Tablet Stand can be used with any tablet. The support slots are wide enough to accommodate a tablet with its protective cover still installed.
The intent of my design is to produce something functional, simple and modern, while using less filament than other designs. It is sturdy and should last the end user a long time.
material: PLA or PETG
layer height: 0.2mm
infill: 15% (minimum)
supports: none