Hot Fusion - mini F3F glider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The model Hot Fusion is a small RC glider with 1,57 m wingspan that can also be build with an electric fuselage.
- Rating
- 5 / 5
- Likes
- 48
- Makes
- 1
- Views
- 3,475
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Standard Digital File License
New Pre-Release V1.3
The model Hot Fusion is a small RC glider with 1,57 m wingspan that can also be build with an electric fuselage.
The wing uses a modern set of airfoils specifically developed for F3b / F3F tasks.
The model can be flown even in light lift conditions, but can also be used in stronger winds thanks to its ballasting option.
When building the electric fuselage, hot-swap between the electric nose and the glider nose is possible.
The downloadable files include detailed assembly instructions in German (original) and English, as well as instructions for printing with a 3D printer.
The new Version V1.3 right now is only a pre-release, as unfortunately the new assembly instructions have not yet been completed.
For this reason, all files from version V1.2 are still available and can be downloaded unchanged.
However, all changes to the Orca projects and STL files for version V1.3 have been completed and include, in particular, improvements to the bondability of the wing and fuselage, so it seemed to make sense to publish the completed data in advance.
With this pre-release V1.3 of the model, release notes V1.3 are also available in the download area.
It is recommended using the Orca slicer projects located in the “Orca_Projects_V1_x.zip” file whenever possible.
The Orca projects were created for use with the Bambulab X1C, so when using this printer there are no adjustments necessary.
Alternatively, all STL files required to print the model are contained in the “STL_V1_x.zip” file and the print guide describes the necessary slicer settings for Orca slicer.
Please also refer to the print guide for information on the required nozzles, build plate, filament recommendations, etc.
Before purchasing the model, we recommend downloading the assembly instructions and printing instructions to decide whether you feel confident enough to print and assemble the model.
You can find the assembly instructions and the print guide here for free download:
https://www.printables.com/model/1319105-hot-fusion-building-instructions-and-test-part