1 / 2
Carrera Digital double lane changer in curve — image 1
1 / 2

Carrera Digital double lane changer in curve

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the "dumb" part of Carrera lane change system with a radius of 2.5 and 20°.

Rating
5 / 5
Likes
16
Downloads
122
Makes
2
Views
1,290
Reviews
2

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — Share Alike

Double lane changer in a curve track for Carrera Digital. You need to provide the first part of the lane changer (which contains the actuator).

This curve has a radius of 2.5 and angle of 20° and counter/clock wise versions.

You can get the inner and outer borders from https://www.printables.com/model/827417-multi-radius-curve-system-for-carrera-evolution-di

Printing Guidelines

  • Ensure the track top faces towards the print bed
  • Utilize a textured sheet for better adhesion
  • Suitable printing materials: PLA or PETG
  • Use light supports or no supports
  • Consider adding “elephant ears” (small circular tabs) at the ends to prevent lifting and improve first-layer adhesion and heating the bed more than usual.

Tags