Silica Gel Box For Smaller Beads
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.81 – €0.99 net (excluding VAT)
For file: Silica Gel Box_0.4n_0.2mm_PETG_MK4S_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.90 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 48.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier.
- Rating
- 5 / 5
- Likes
- 144
- Downloads
- 654
- Makes
- 4
- Views
- 2,649
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel. So I found just a plain container and made it have the infill exposed so that it could let air in, and out. One thing about it is that it is also a bit smaller, so it can be harder to pour in your silica gel. So I made a funnel that takes a short time to print, and speeds up the process a lot. Here is the link for the funnel: https://www.printables.com/model/1319366-silica-gel-funnel
Printing Settings:
| Resolution : | 0.2 | Support: | NO |
| Infill : | 25% Gyroid | Brim: | NO |
| Material: | PETG | Filament Color : | Orange |
More designs
