Phone Remount for E-moto bikes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a new place to mount your phone when space on the handlebars is limited.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 274
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
# Parts List:
Print Strong - 4+ walls; decent infill (I used PETG)
- 2 @ PhoneRemount_Arm.stl
- 2 @ PhoneRemount_Clamp.stl
- 1 @ PhoneRemount_Bar.stl
## Optional
Print using TPU
PhoneRemount_Spacer.stl
## Hardware:
- 4 @ M4 Socket head bolts 25-30mm
- 4 @ M4 nuts to match
### Notes
The nut should fit snug in the slot. If it's loose at all I would suggest placing a piece of tape over the slot to make installation easier.
The crossbar only has 1 set of keyways, this has not been an issue so far and make aligning arms way easier.
The slots for the nuts should be towards the center and not facing out.