Chick wall feeder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounted feeder
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
Wall mounted gravity fed wall feeder for chicks. Suitable for chick crumb, potentially chick starter pellets but I haven't tried with these. Approx 150mm high x 80mm wide x 40mm deep. Has a slight ‘anti-spill’ overhang on the inner tray area to reduce mess. 3 x screw holes to mount to a wooden surface, Comes with optional lid.
PRINT SETTINGS: Print main body vertical. Supports required, however print at 5% density for ease of removal. 3 walls, 10% infill. Print lid (optional) top down.
POST PRINT SUPPORT REMOVAL: Removing the supports is time consuming! Remember to remove the support layer around the inner rim (anti-spill overhang)