Card holder with money tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired from Hugo, I have a new version of this item. for 8 cards, and a money tray maintened by magnets
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This card holder is printed using two files: the first consists of two parts that need to be detached after printing, very similar to Hugo's model printed as print-in-place.
To avoid losing the drawer, attach two small magnets (4 mm in diameter and 1.5 mm thick) under the main body of the case and two magnets (8 x 4 x 3 mm) under the drawer using quick-drying glue (mind polarity !).
I used Prusa PETG, in 0.25 speed mode, but you can do better if you have time and the machine is well adjusted. The card management could be improved, but by holding them back when you push the lever, you learn quickly.
The cards are held in place by springs printed on the sides of the slide.
For those interested, I can provide the freecad file, just ask per e-mail