1 / 1
KEY2 port cover for Elecraft KX3 / KXPD3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace a lost KEY2 jack cover, streamline attaching your KXPD3, or customize your rig with a printable KEY2 jack cover.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 30
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Pictured in Bambu Lab TPU 95A HF; also tested in PLA. Should print fine in other materials but may require adjustment or drilling if the holes in the 4-pin connector come out too small.
Three options for the “KEY2” legend:
- none: flat front
- engraved: 0.5mm indented legend
- contrasting: flat, with separate bodies for the legend, so you can print them in a different color
Three options for the screw holes:
- flat: Attaches only to the 4-pin KEY2 connector. Easiest to attach and remove, but the least secure.
- holes: Has screw holes like the original cover from Elecraft. Most secure, but requires keeping track of screws and screwing/unscrewing them frequently.
- pegs: Includes small, unthreaded pegs that go into the screw holes and provide some additional security. Relatively easy to attach and remove, and no screws required.