1 / 3
Lasercutting Weighted Workpiece Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
small weighted holders for lasercutting beds
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — NoDerivatives
For laser cutters with a ‘knife’ bed system as shown below.
Holes should be at least 8mm apart (usually not a concern.)
Threads are M6 and are 22mm deep. Only screw in for the first 20mm or so.
I suggest PETG or stronger, but if you need something urgently, PLA will work too.
Threads are somewhat tights. If your printer is cheap, consider scaling up the model by one or two percent.
Use eyebolts and small 1kg weights if you can.
Ideal print orientation ^