1 / 5
Nintendo Switch 2 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hardcase for the Nintendo Switch 2 with TPU inlay, printable on a MK4S.
- Rating
- 5 / 5
- Likes
- 113
- Downloads
- 753
- Makes
- 8
- Views
- 4,136
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hardcase for the Nintendo Switch 2, printable on a MK4S.
I printed it out of Prusament Galaxy Black, Prusament Galaxy Silver and Polymaker PolyFlex TPU95. Additionally, you need:
- 14 countersunk screws M3x25 (M3x30 should also work)
- 8 square nuts M3
- glue (for tpu parts mount)
Build it in the following steps:
- Print all the parts (I used 0.2mm structural, 15% for all parts, there are some supports needed)
- Drill the holes in frontside and backside where the lid and the hinge are mounted with a d3 drill
- Assemble lid and hinge to frontside and hinge to backside with 6 countersunk screws M3x25
- Assemble left/right parts to frontside/backside with 8 screws M3x25 and 8 square nuts m3
- glue TPU parts into front-/backside
Backside has an opening for a Switch game box, I use it with this cartridge holder.
Until now, the case works fine. But I am open for optimisation and integration of further ideas. Open points:
- carrying handle
- dedicated space for the Joy-Con mouse brackets
Update 2025-6-29: Frontside parts updated as cutout was not present