1 / 2
Mounting clip for the sensor stick and Presto from Pimoroni
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount the sensor stick add-on to the base of your Pimoroni Presto. Uses two M2.5 screws and heat set threaded inserts.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 1
- Views
- 140
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The sensor stick from Pimoroni to add air temperature, pressure, air quality and an accelerometer to the Presto desktop display had no mounting on the Presto. So rather than just have it hanging off a cable, I made this clip with mount it on the Presto base. Uses 2 heat set threaded inserts (M2.5) to allow the sensor stick to be attached to the clip using a couple of short screws. Then it clips securely to the base plate of the Presto (it slides on from the back).