RatRig V-core 4 toolhead cartographer mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mounting height has been reduced to maintain offset
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Use this model to check nozzle offset
At the moment, to use cartografer in ratos you need to disable adaptive mesh in your printer.cfg
[gcode_macro RatOS] variable_adaptive_mesh: False
at the end of [gcode_macro _START_PRINT_BED_MESH]
add
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=150TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150CARTOGRAPHER_TOUCH
you also need to comment out the line in your RatOS.cfg
#[include RatOS/z-probe/beacon.cfg]
to do this automatically when the printer is turned on, add to /etc/rc.local
sleep 15sed -i '/beacon/s/^/#/' /home/pi/printer_data/config/RatOS.cfg
All other settings and calibrations should be done according to the official instructions on the developer's website